The three choices are: The small radius of the drum and the stiffness of the paper peel the paper away from the drum. You can improve the print quality temporarily by redistributing the toner as follows: The print quality of HP LaserJet cartridges influences the customer’s perception of the printer. Indicator Mode Description Ready On: Label Construction When selecting labels, consider the quality of each component: Replace or reseat the roller.
|Date Added:||21 October 2009|
|File Size:||48.59 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Remove the metal cover. This initiates the Print period. This information may be of use to a service technician. Remove third party memory, if installed.
The tray is sensed as the tray-identifier tabs contact one or more of the three tray identifier microswitches. Observe proper ESD procedures when archivdd the printer. In certain cases, this might be the only way to recover one’s data in the event of a system laserje that occurred while printing. Complex graphics and PostScript applications also require more memory than is included in the standard printer configuration.
Hewlett-Packard Company 4pous warrants nor recommends the use of a particular brand of envelope. Protocol on the printer is set by changing the control panel. Note Run a printing self-test after replacing the high voltage power supply.
Solved: Windows 7 and HP LaserJet 4 Plus – HP Support Community –
Turn ON the printer. Information about the current configuration appears here. Ji-in message is displayed. This can be problematic because many of the converter cables do not support Windows 7. If labels with exposed areas hewltet used, they should be arranged on the carrier sheet the backing so that they cover the entire page with the exposed areas of the carrier sheet running lengthwise down the sheet.
laerjet Preventive Maintenance Figure Removing tiie MP Tray Tray 1 Separation Pad 4 Insert a small screwdriver into the indent at the front of the separation pad and laserjef lift the pad from its seat see Figure If the problem persists, refer to ” Message” section.
Skin and clothing are best cleaned by removing as much toner as possible with a dry tissue, then washing with cold water. To install the Envelope Feeder: The Sensing Arm flags are attached to shafts.
HP LaserJet 4
Hewlett Packard dominated the laser printing sector during this time in prihter due to their reliability, relatively affordable pricing, and the spread of LaserJet 4 models from personal use up to heavy business use. MP and combinations No trays are locked out. April Learn how and when to remove this template message.
Reserved for MIO and Network statistics. Replace these components as needed, based on printer failures or wear, not strictly on usage. Another option with the Laserjet 4 would be to add a JetDirect card which would provide a network port for the Laserjet 4.
The RAM memory is used to store temporary information that will be used by the printer for a particular print job or a series of print jobs. During normal operation, the Paper Sensing Arm flags rest on the media installed in the paper tray. Allow the printer to stand 6 hours until any condensation has dissipated.
For instance, short media and heavy stock can be fed from the MP tray Tray 1 because it senses media length and has a relatively straight paper path. I have a new Acer laptop with Windows 7 64bit. This information is intended to augment and not replace the information provided with the accessories themselves. It provides the Service Representative with an understanding of the printing process. Figure Installing the Printer on the Lower Cassette 5 Reconnect the printer cables and run a self test to ensure the lower cassette is recognized by the printer.
When the DC controller identifies the last line of print data on the first page, the laser diode is forced ON and generates a sweep beam used to adjust the laser power.